Similar Products
Similar Products

Structural adhesive Bond+Seal

Bond and Seal structural adhesive
BONDSEAL-KD-WHITE-300ML
Art.-no.: 08901001
Selected article: Other versions
Questions? 1800 102 5061
price/PU Prices for customers after login
x 1
Exclusively for trade customers Register now and access more than 125,000 products
Product information:
Specification
Elastic PU adhesive and sealant for a wide range of applications

Universal application

Outstanding adhesive strength on a wide range of materials and surfaces.

Approved for use with foodstuffs (ISEGA certificate)

  • Harmless to health in hardened state
  • Suitable for gluing and sealing in food processing areas

Highly elastic

  • Bonding of identical and different substances possible
  • Compensation of different material expansions
  • Absorbs vibrations and sounds

Long skin formation time

  • Allows bonding or sealing of complex components
  • Also ideal for large surfaces
  • Assembly components can be repositioned

Can be ground/painted

Following skin formation, can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility).

Not corrosive

Avoids corroding the metal

Odourless

Silicon-free

Notice

Do not allow this product to come into contact with alkyd-resin paint systems. Not suitable for glass groove sealing and for expansion joints in the construction sector.

Direct sunlight may result in yellowing of the surface. Not suitable for PE, PP, PTFE, silicone, polystyrene and plastics.

Minimum adhesive thickness: 3 mm. It is essential to use Adhesion Plus products in order to achieve optimum adhesion results.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

For a wide range of bonding and sealing work on surface materials such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard PVC).

Instructions

The surfaces must be clean, dry and free from dust and grease. Processing temperature is between +5°C and +35°C.

Best adhesive results are guaranteed when the surfaces are pretreated with Activating Cleaner (art. no. 089010060) and Primer for Metal (art. no. 089010061) or Primer for plastic/wood/stone (art. no. 089010062). Unhardened material can be removed with glue remover (art. no. 089010063), hardened material can only be removed mechanically.

A minimum adhesive layer thickness of 3 mm is recommended to harness the benefits of thick-coat bonding.

Technical information

Chemical basis

Single component polyurethane

Colour

White

Smell/fragrance

Characteristic

Min./max. skin-formation time

45-60 min

Full curing speed/conditions

3 mm/d / 23°C and 50% relative humidity, moisture curing

Fully hardening/curing conditions

23°C and 50% relative humidity, moisture curing

Shore A hardness

40

Density/conditions

1,25 g/cm³ / prior to hardening, DIN 53479

Min. tensile strength

1.8 N/mm²

Conditions for tensile strength

in accordance with DIN 53504

Min. longitudinal resistance to tearing

6 N/mm

Conditions for resistance to tearing

in accordance with DIN 53515

Elongation at break

500 %

Elongation at break/conditions

500 % / in accordance with DIN 53504

Min. combined tension and shear resistance

1 N/mm²

Conditions for specific volume resistivity

in accordance with DIN 53482

Min./max. processing temperature

5 to 35 °C

Min./max. temperature resistance

-40 to 90 °C

Max. short-term temperature resistance

120 °C

Min. flashing point

70 °C

Glass transition temperature/conditions

-45 °C / in accordance with DIN 53445

Shelf life from production/conditions

12 Month / at 10°C to 25°C

Silicone-free

Yes

Resistance against

Water
Lime water
Public sewage
Weak acids
Weak lyes
Salt water

Short-term resistance against

Fuels
Mineral oils
Animal fat
Animal oils
Vegetable fat
Vegetable oils

Contents

300 ml

Container

Cartridge

Suitable glove:
Permeation level: 2
Cotton velour lining
Permeation level: 3
Long, heavy-duty design
Permeation level: 1
Liquid-proof, premium-quality cleaning glove made from natural latex
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time Permeation level

< 10 min

0

≥ 10 min

1

≥ 30 min

2

≥ 60 min

3

≥ 120 min

4

≥ 240 min

5

≥ 480 min

6

Important information:
The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Last viewed
 
In order to guarantee the best service possible, we make use of cookies. By using our services you agree to the privacy policy. Close
Top