Multi-purpose grease III - GRSE-(MULTIGREASE III)-FDGRD-400G

Multi-purpose grease III

Name: Multi-purpose grease III
Brand: Würth
SKU: 0893107002

Multi-purpose grease III
GRSE-(MULTIGREASE III)-FDGRD-400G

Art.-no. 0893107002

EAN 4053479304762

All versions

Similar products

Prices for customers after login

Multi-purpose grease III

Art.-no. 0893107002

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Physiologically inert, colourless grease with a multi-functional combination of additives.

Can be used in areas in which food is processed or stored

Highly adhesive

Squeeze-stable and resistant to oxidation

Promotes sealing

Resistant to dust and water

Resin, acid and silicone-free

Notice

Greases are supplied in plastic cartridges. The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed! For further information, refer to the technical data sheet.

NSF H1 registered (no.: 135924), meets the requirements of USDA 1998 H1. The product may come into contact with foodstuffs for technical reasons.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Physiologically non-hazardous, colourless grease with multi-functional additive combination for lubricating and protecting seals, jointed and moving parts in which there is a risk of direct contact between the lubricant and foodstuffs.

Instructions

Clean the lubricating point thoroughly before filling for the first time. Fill the bearing house up to about halfway. Observe the bearing manufacturer specifications. Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used. If the product is to be used as an anti-corrosive film, it must completely be removed before the device in question is used again.

Weight of content	0.4 kg
Container	Cartridge
Soap base	Inorganic
Lubricant code	KP2N-20
Min./max. temperature conditions	-15 to 130 °C
Colour	Transparent
NLGI grade/conditions	2 / with DIN 51818
Base oil viscosity, kinematic/conditions	200 mm²/s / at 40°C
Min./max. worked penetration /conditions	265 x 0.1 mm-295 x 0.1 mm / in accordance with DIN ISO 2137
Corrosion protection period/category	Corrosion category 0
VKA welding load	2200 N
Shelf life from production	24 Month
Oil basis	Medical white oil
Behaviour in the presence of water/conditions	0-90 / in accordance with DIN 51807-1
Lubricant system	Grease
Smell/fragrance	Characteristic
Density	0.88 g/cm³
Density conditions	at 20°C
Conditions for viscosity of oil basis	at 40°C
Min. temperature conditions	-15 °C
Max. temperature conditions	130 °C
Max. short-term temperature resistance	150 °C
Worked penetration conditions	in accordance with DIN ISO 2137
Conditions for NLGI grade	with DIN 51818
Corrosion protection period conditions	in accordance with DIN 51802, SKF Emcor test
Conditions for VKA welding load	in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)
Resin-free	Yes
Silicone-free	Yes
Acid-free	Yes
AOX-free	Yes
Free from heavy metals	Yes
Chloric	No
Resistance against	Water Salt water Acid Lye

Additional accessory:

Product

Description

Quantity

Price
/PU

Hand-lever grease gun For 400 g cartridges

GRSEGUN-HNDLEVER-75/PK

Art.-no. 098600

(DIN 1284, 235 x ∅ 53.5 mm) or for 500 cm³ loose grease

x 1 pcs

Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun

RBRHOSE-(F.GRSEGUN-HNDLEV)-M10X1-30CM

Art.-no. 0986002

x 1 pcs

Chuck For hand-lever grease guns

MTHPCE-(F.GRSEGUN-HNDLEV)-LUB-M10X1

Art.-no. 0986003

x 1 pcs

Combination filling appliance

FILR-LUB-COMBI-F.GREASE-25KG

Art.-no. 098602

Filling appliance for professional, economical and clean application of lubricants

x 1 pcs

Lube-Shuttle<SUP>®</SUP> hand-lever grease gun

Lube-Shuttle® hand-lever grease gun

GRSEGUN-HNDLEVER-LUBESHUTTLE

Art.-no. 098605

The system for lubricating greases in 400 g system cartridges

x 1 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.