Furnace putty 1000

Name: Furnace putty 1000
Brand: Würth
SKU: 08932900

Sealing compound, Fire cement 1000
PUTY-HTEMP-OVENCEMENT1000-310ML

Art.-no. 08932900

EAN 4053479393872

All versions

Prices for customers after login

Furnace putty 1000

Art.-no. 08932900

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Solvent-free 1-component sealing compound with optimum heat resistance, high degree of strength and excellent adhesion to metal surfaces

No formation of sediment

The individual constituents do NOT separate during storage

Ready for use

No prior stirring is necessary as with products in tubs, for example

Easy to apply with a cartridge gun

Frost-resistant

Storage temperatures below 0 °C (approx. -5 °C) possible

Silicone-free

Notice

The putty is not elastic once it has cured.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Boiler putty 1000 is used in the heating equipment sector, particularly for sealing boilers, ovens, cookers, chimneys, burner chamber fittings, smoke gas pipes and a wide range of equipment and apparatus in the high-temperature sector up to 1000°C, but it can also be used in place of sealing cords in boiler system doors following an annual inspection and/or after cleaning.

Instructions

The surfaces must be clean, dry, free from grease and unpolished. For more information, please refer to the technical data sheet.

Chemical basis	Water glass luting with mineral fillers
Contents	310 ml
Container	Cartridge
Max. temperature resistance	1000 °C
Density	2.21 g/cm³
Colour	Cast grey
Recoatable/Can be painted over	Yes
Smell/fragrance	Neutral
Viscosity/consistency	Pasty
Long-term elasticity	Virtually no elasticity
Shrinkage	Minimal
Curing time	2 d
Full curing speed	1 mm/d
Water-soluble	Not readily soluble in water
Min./max. temperature resistance	-5 to 1000 °C
Min./max. processing temperature	5 to 30 °C
Resistance against	Fats Household cleaning products Oil Flue gases and their condensates
Shelf life from production/conditions	12 Month / in sealed cartridge, max. 30°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.