Rubber Fit rubber care

Name: Rubber Fit rubber care
Brand: Würth
SKU: 08930128

Rubber care, Gummifit
RBRCARE-SILICONEFREE-75ML

Art.-no. 08930128

EAN 4053479223926

All versions

Prices for customers after login

Rubber Fit rubber care

Art.-no. 08930128

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Silicone-free care for rubber seals

The rubber parts remain supple, thereby increasing their service life and preventing cracks

Freezing and drying out is prevented effectively in winter

Eliminates squeaking and creaking noises

Silicone-free

Resistant to splash water and salt water

Biodegradable

Resistant to diluted acids and bases

Water-resistant

Notice

Use of the product on acrylic glass (PMMA) may result in stress cracks.

Keep away from sources of ignition and do not smoke. In case of contact with eyes, flush thoroughly with water and contact a physician immediately. Only use in well-ventilated areas.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Protects door, luggage compartment and bonnet rubber seals and provides reliable protection against freezing in winter.

Instructions

Use the sponge attached to the bottle opening to apply a thin layer of Rubber Fit to the rubber seal.

Contents	75 ml
Smell/fragrance	Characteristic
Chemical basis	Hydrocarbon
Colour	Colourless
Density/conditions	0.77 g/cm³ / at 20°C
Min. flashing point	64 °C
Bio-degradable	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.