Active Clean vehicle cleaner - CLNR-VEH-IN-(ACTIVE-CLEAN)-500ML

Active Clean vehicle cleaner

Name: Active Clean vehicle cleaner
Brand: Würth
SKU: 0893472

Cleaner for vehicle Active-Clean
CLNR-VEH-IN-(ACTIVE-CLEAN)-500ML

Art.-no. 0893472

EAN 4053479303956

All versions

Similar products

Prices for customers after login

Active Clean vehicle cleaner

Art.-no. 0893472

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Intensive foam cleaner for the entire vehicle interior

Micro-fine active foam (vacuum effect)

Foam remains on the surface and actively draws out the dirt when the foam bubbles burst

Outstanding dirt-dissolving power

Upholstery does not become wet, meaning drying times are shorter

Gentle on materials, suitable for all surfaces in the vehicle interior. The pre-determined breaking points of the airbag are not affected.

20x yield

500 ml Active Clean equates to the yield of approx. 10 litres of liquid cleaning product

Saves money

Notice

Protect product from frost.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

Spray Active Clean onto a clean, dry cloth and wipe over the areas to be treated. Treat plastic parts with cockpit care afterwards. With fabrics and upholstery, let the foam take effect briefly and remove any soiling with a brush or sponge where necessary. With spots, work from the outside inwards. Then vacuum the upholstery.

Contents	500 ml
Container	Aerosol can
Smell/fragrance	Fruity
Colour	Colourless
Chemical basis	Water, soap and glycol
pH value	7.7
Min. flashing point	0 °C
Shelf life from production	24 Month
Bio-degradable	Yes
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.