Square wedge-shaped washer DIN 435, zinc-plated steel, for I-section
DIN 435 steel zinc plated for I-carrier
WSH-WDGE-DIN435-(A2K)-11X22X22MM-F.M10
Register now and access more than 125,000 products
Datasheets(X)
CAD data (available after login)
Tapered washers for I-sections, for screw connections up to strength class 5.6
 | |
Suitable for screw thread (Ø) | M10 |
Internal diameter (d1) | 11 mm |
Length (l1) | 22 mm |
Width (b1) | 22 mm |
Height (h1) | 4.6 mm |
Standards | DIN 435 |
Material | Steel |
Surface | Zinc plated |
Tilting | 14 % |
Suitable for | I section |
RoHS-compliant | Yes |
Last viewed
Air conditioner system cleaner A/C
Sealant remover
1/2 inch ratchet With turntable switching
Linen adhesive tape
Fuel hose clip Power with high tightening torque
Rapid repair tape HR
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain