Rapid Dent Removal from outside of the vehicle body.
- Allows welding on of Triangle Washers, Round Washers, Long Washers, Zig Zag Wire.
- Carbon Electodes (Rods) can be used with the machine to shrink the metal.
- Extra long cable enable long reach
- Short welding time max.1 sec.
- Fixed Power setting for Carbon Mode.
- Variable Power and time setting for Dent Mode.
- Body Straightner (Optional)
These instructions are only recommendations, which are based on our experience, preliminary testing advised before use.
Application areaOn Dent of Car and Two Wheeler Steel Sheet Metal Body.
Instructions- Remove the Paint on the dent surface till bare metal.
- Weld the appropriate electrode using the Gun.
- Pull the dent using the sliding hammer or Body Straightener (Optinal).
- Use the Carbon electrode along with the adapter to shrink the repaired area.
Dent Puller Digital including:
1
x
Claw Hammer Dent Puller
AY-CLAW-HMMR-DRSW-115X55X510MM
Description:
For Pulling dent along with Zig-Zag wire Electrode
Quantity:
1
x
2
x
Wiggle wire
AY-WELDWRE-DRSW
Description:
For welding onto steel bodywork for 3x claws and Bi-Puller
Quantity:
2
x
50
x
Copper washer
AY-HOLEWASHER-DRSW-COPPERPLTE-D8X16X1,5
Description:
8 x 16 x 1.5 mm
Quantity:
50
x
1
x
Welding Tip Punched Disc
AY-WASHER-SPTWELD-WELDINGTIP-0691500297
Quantity:
1
x
10
x
Twisted Washer Dent Pulling
AY-WASHER-DRSW-TWISTED-0691500297
Quantity:
10
x
10
x
Straight Washer Dent Pulling
AY-WASHER-DRSW-STRAIGHT-0691500297
Quantity:
10
x
1
x
Dent removal slide hammer
ZB-SLIDINGHAMMER-ASS-0691500297-350X50MM
Quantity:
1
x
5
x
Carbon Electrode Dent Puller
AY-CARBONELECTRODE-DRSW-0691500297
Description:
For Carbon Shrinking
Quantity:
5
x
5
x
Panel pull triangle
AY-WASHER-DRSA-SPEC-CU-3SIDED-50,5X44MM
Quantity:
5
x
1
x
Welding Adapter Long Washer
AY-WELD-ON-ADAPTER-DRSW-LONGHOLEWASHER
Description:
For Dent Pulling with long washer
Quantity:
1
x
1
x
Adapter Carbon Electrode
AY-ADPTR-DRSW-CRBN-ELCTRODE-65X16MM
Quantity:
1
x
1
x
Welding Tip Zig- Zag Wire
AY-ZIG-ZAG-WIRE-WELDNG-DRSW-100X12MM
Description:
For Welding ZIG-ZAG wire
Quantity:
1
x
Structure of our article number
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
