Welcome to Würth India For trade customers only

Support clip Nova Grip Zinc-plated steel C45

Support clip Nova Grip MTH steel zinc plated
SPRTCLIP-NOGR-STDD-(ZN)-M10

Art.-no. 0485000031
EAN 4053479553047
Prices for customers after login
Support clip Nova Grip Zinc-plated steel C45

Art.-no. 0485000031

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

(Heat-treated steel C45 +N according to DIN EN 10083-2)

Used to establish force-transmitting connection between intersecting supports of different shapes and dimensions.


Connection of superimposed supports also possible with identical flange widths.

Notice

For equalising different flange thicknesses, up to three spacers with a total thickness of max. 15 mm, can be additionally placed between the support clips and connecting plates.


For type M12-LAS, height equalisation of two additional spacers (compared to standard type) is integrated.

General construction permit Z-14.4-493


Support clips M8 type standard and M12 type LAS without general construction permit

Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area

General construction permit no. Z-14.4-493 for support clips governs support clip connections for static, effectively static and dynamic effects.


Screws and support clips that have already been subjected to dynamic effects may not be reused.


Rated values of load capacity and threshold tensile force per clamped connection are described in general construction permit no. Z-14.4-493.

Instructions

For fixing connection elements, an assembly plate (strength class S235 or higher/plate thickness of at least 10 mm) is positioned between the supports to be connected.


Details of the respective plate dimensions and hole distances are indicated in general construction permit no. Z-14.4-493.


Screw fittings according to DIN EN 14399-1 or DIN EN 15048-1 consisting of hexagonal screws of strength class 8.8 or 10.9, nuts of strength class 8 or 10 and associated washers with a minimum hardness of 100 HV must be used, whereby for fittings of strength class 10.9 two washers are to be placed beneath the nuts in each instance.

Suitable for screw

M10

Diameter of hole (d1)

11 mm

Length (l1)

36 mm

Width (b1)

32 mm

Height (h1)

21 mm

Nose length (e1)

13 mm

Distance from end of terminal to the middle of the drill hole (c1)

16 mm

Clamp height range (G)

-6 to 10 mm

Material

Unalloyed steel, C45

Surface

Zinc plated

RoHS-compliant

Yes

Conditions for tightening torque

See approval

Tightening torque for property class 8.8

40 Nm

Tightening torque for property class 10.9

60 Nm

Type description

Standard

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information