Multifunctional lubricant MULTI BIO - ADHLUB-(MULTI BIO)-400ML

Multifunctional lubricant MULTI BIO

Name: Multifunctional lubricant MULTI BIO
Brand: Würth
SKU: 08930551

MULTI BIO multifunctional lubricant
ADHLUB-(MULTI BIO)-400ML

Art.-no. 08930551

EAN 4053479304755

All versions

Similar products

Prices for customers after login

Multifunctional lubricant MULTI BIO

Art.-no. 08930551

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Multifunctional and biodegradable lubricant with excellent adhesive properties

Excellent adhesive properties on a wide range of surfaces

No spatter with quick rotary movements

Ideally suited for lubricating vertical lubricating points

Ideally suited for lubricating under difficult re-lubrication conditions

Good penetration

Penetrates even the smallest tolerances when sprayed

Addition of special additives

Corrosion protection additive – reliable, long-term corrosion protection

Anti-wear additive – prevents early wear.

Biodegradable in line with OECD 302

Splash-resistant

Silicone-free and acid-free

Notice

Biodegradable in accordance with OECD 302

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Multifunctional and biodegradable lubricant with excellent adhesive properties. Can be used anywhere where there is a risk of load from the ground and water due to the lubricant.

Suitable for lubricating chains and machine parts, joints, hinges, gearwheels, winches, toothed racks, slide rails and much more.

Instructions

Shake the can before use. Spray the area from a distance of approx. 15–30 cm and allow to flash off. Clean and degrease heavily soiled parts first. Clean the spray nozzle after use by holding the can upside down and spraying until all residues have been expelled.

Chemical basis	Synthetic ester oils and native fatty oils
Colour	Yellowish
Smell/fragrance	Characteristic
Density	0.624 g/cm³
Density conditions	at 20°C
Min. temperature conditions	-20 °C
Max. temperature conditions	90 °C
Kinematic oil basis viscosity	500 mm²/s
Conditions for viscosity of oil basis	at 40°C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
Contents	400 ml
Weight of content	249.4 g
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.