Silicone acetate - SILSEAL-ACE-BLACK-310ML

Silicone acetate - SILSEAL-ACE-BLACK-310ML - 1

Silicone acetate - SILSEAL-ACE-BLACK-310ML - 2

Silicone acetate - SILSEAL-ACE-BLACK-310ML - 3

Silicone acetate - SILSEAL-ACE-BLACK-310ML - 4

Silicone acetate

Name: Silicone acetate
Brand: Würth
SKU: 08925705

Silicone acetate
SILSEAL-ACE-BLACK-310ML

Art.-no. 08925705

EAN 4053479223810

All versions

Similar products

Prices for customers after login

Silicone acetate

Art.-no. 08925705

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

For tile joints subject to medium stresses, for indoor and outdoor use

Broad range of uses

Excellent adhesion to a broad range of substrates, especially also on glazed surfaces

Highly resistant

Resistant to ageing, weathering and UV

Permanently elastic

Can be painted

Notice

Not suitable for use in building construction joints in accordance with DIN 18540. Due to the wide variety of paint and lacquer formulas available, we recommend that you always carry out preliminary testing in order to rule out any interactions. Caution: Sealant joints that have been fully painted over tend to crack when movement occurs in the joint, as the applied paint is generally less elastic than the sealant. The setting speed is dependent on the application temperature, the weather and the surface moisture. The speed is greatly delayed in cold, damp weather. Discolouration may occur in wood containing tannic acid. For vertical joints, please observe the run-off behaviour of the sealant. May cause corrosion on metals such as steel, copper and zinc-plated surfaces.

Not for use in contact with pre-compressed sealing tapes.

Acetoxy silicone is not suitable for bonding or filling cavities. Due to the large number of varnish and glazing formulations available, always carry out your own tests on the area first, especially on alkyd resin paints and powder-coated aluminium.

Tested in accordance with EN 15651 Part 1

Fire behaviour: Class E

Stability under load: ≤ 3 mm

Volume loss: ≤ 25%

Tensile behaviour under pre-stress and immersion in water: NF

Durability: Passed

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Sealing of expansion joints exposed to medium loads, for indoor and outdoor use

Instructions

The substrate must be intact, clean, dry and free from grease, rust and water. Do not use in heavy rain. Observe the joint dimensioning. Prime the joints with PE back-fill material, art. 0875... On absorbent and porous substrates (e.g. concrete), priming (silicone primer 0892170) improves adhesion. When using smoothing agents, it must only be used before the skin formation time and must be completely removed after use with a smoothing tool. Excess quantities next to the joint must also be removed immediately. Otherwise staining may occur. Please observe the "General Notes on Application for Sealants" overview sheet. For more information, please refer to the technical data sheet.

Container	Cartridge
Contents	310 ml
Chemical basis	Sauer silicones (acetate systems)
Colour	Black
Continuous motion absorption	12.5 %
Shore A hardness	20
Min./max. processing temperature	5 to 40 °C
Min./max. temperature resistance	-40 to 120 °C
Min./max. full curing speed /conditions	2-3 mm/d / 23°C and 50% relative humidity
Min. skin-formation time	15 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Min. breaking elongation	500 %
Fungicidal properties	No
Shelf life from production	18 Month
Density	1 g/cm³

Required accessory:

Product

Description

Quantity

Price
/PU

Hand cartridge gun high-quality

MANCLKGGUN-CART-RED/BLACK-310ML

Art.-no. 089100

High-quality design, semi-open, made of sheet steel with plastic handle

x 1 pcs

Standard manual cartridge gun

MANCLKGGUN-CART-QUICK-310ML

Art.-no. 0891000001

Standard design, semi-open, made of sheet steel with quick-release device

x 1 pcs

Manual caulking gun for cartridges Basic

MANCLKGGUN-CART-MET-310ML

Art.-no. 0891001

Simple design, semi-open, made of sheet steel with riveted struts

x 1 pcs

Cartridge gun Airquick

CARTGUN-PN-AIRQUICK-310ML

Art.-no. 0891700310

For 400 ml bag goods and 310 ml cartridges

x 1 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Cartridge cutter

CARTKNFE

Art.-no. 071566 09

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle

x 1 pcs

Sealant smoothing agent

SMTHR-SEAL-AEROSOL-400ML

Art.-no. 0893003

Universal smoothing agent suitable for all types of sealants

x 1 pcs

Packaging unit

Structure of our article number

Information on price display

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 3

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.