Engine sealing compound Silicone Special 180

Name: Engine sealing compound Silicone Special 180
Brand: Würth
SKU: 0890320

Engine sealing compound, Silicone Special 180
ENGSEALCOMPD-SIL-SPECIAL180-TRANSP-70ML

Art.-no. 0890320

EAN 4053479223605

All versions

Similar products

Prices for customers after login

Engine sealing compound Silicone Special 180

Art.-no. 0890320

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 1800 102 5061

Permanently elastic silicone sealing compounds for engine and bodywork with excellent adhesion

Cold-vulcanising silicone rubber

Bridges larger unevenness

Reliable at sealing, even after withstanding years of vibrations

Does not run or pull threads

Excellent adhesion and chemical resistance

Skin formation after just a few minutes, vulcanisation rate approx. 1.5 mm/day

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For sealing surfaces, gaps and cracks in separating joints, cylinder heads, crank housings, water pumps, coolers, axle tubes, cylinder bases (motorbike), lamp and turn signal housings, welding seams etc.

Contents	70 ml
Chemical basis	Oxime-curing sealant
Density/conditions	0.97 g/cm³ / at 20°C
Full curing speed	1.5 mm/d
Colour	Transparent
Smell/fragrance	Characteristic
Weight of content	100 g
Min. skin-formation time	8 min
Max. skin-formation time	15 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Shore A hardness	18
Elongation at break	300 %
Continuous motion absorption (up to 150°C)	25 %
Continuous motion absorption (above 150°C)	18 %
Min./max. temperature resistance	-50 to 150 °C
Max. short-term temperature resistance	180 °C
Min./max. processing temperature	5 to 60 °C
Shelf life from production	18 Month
Conditions to maintain shelf life from production	cool and dry storage area below 25°C

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 3

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.